How To Set Scale In Autocad 2013

Download Article

Download Commodity

This article will show you how to scale lines, objects, groups, blocks, or images in AutoCAD in two ways. The commencement is scaling past a factor, the second is scaling with a reference. Both methods are useful to AutoCAD users and make life just a little fleck easier for us!

ane

Open up an AutoCAD file with lines/objects/groups/blocks/images that you tin scale. If it's a new file, only draw a line or insert an paradigm.
2

Select what you want to scale.

Advert
3

Notice the scale option. You can type "sc" or "scale" and press the spacebar/enter button, or in the ribbon, in the alter tab, discover the Calibration button (It'south a blue square with a smaller greyness square in the bottom left corner. If information technology'southward not in your modify tab, click the drib down arrow for more modify options.)
4

Specify your base signal when asked. Your base point can exist on the object itself or it can be anywhere in the workspace. You tin even click a bespeak on another object to apply as a base point. You can for example select the edge of something, or the midpoint. Select your base point past clicking on it.
five
Specify your calibration factor. Using method 1 (scaling past a cistron), you can now type a number (a scale cistron) and printing spacebar/enter. Your object volition alter size according to that number. If yous apply decimals, the thing you lot want to calibration will become smaller. Voila! You're done!
- Alternatively, you can scale by moving your cursor around. When y'all find a size that you want, just left click on the mouse to enter. This step makes it very difficult to scale down though.
Advertizing

i

Make sure y'all accept two objects to piece of work with. This method is when yous take a sized object, and y'all want to make another object to be the aforementioned length/size/proportion as the beginning one. For this method you lot demand 2 objects to work with. One could be a line/object/block/prototype/grouping and the other could be different (eg. one line and one image, or one block and one prototype). Or they could both be the same thing (eg. 2 lines or 2 images).
2

Line up the two things then they accept the aforementioned base signal. Choose which object is the correct size for you, and leave it alone. Choose the thing you want to calibration and click on it.
3

Blazon "sc" or "scale" and printing ↵ Enter . Or cull the Calibration button from the alter tab in the ribbon.
4

Specify a base point when asked. So select your base point (could exist the point where the 2 objects line upwards).
5

Expect for the prompt bar to ask 'specify scale gene or [Copy] [Reference]'. You tin click on "reference" / or simply blazon "r" and ↵ Enter .
six

Click on the base point of your object
7

Wait for the prompt to ask you to 'specify second indicate'. You can select a midpoint of the object, or select the end, depending on how much you want to scale it. According to what yous desire, click on a point anywhere the object you desire to scale. (Don't click on the objects base point once again.)
8

Specify a new length. Now you can click on how long you lot want the object to exist. It could exist to the midpoint of the first object, or information technology could be the total length of the first object. If you put the Object Snap (OSnap) off now, you can click anywhere in the workspace and your object volition scale to that size.

Advertisement

Add together New Question

Question

What is the employ of scale in AutoCAD?

This answer was written by 1 of our trained squad of researchers who validated it for accuracy and comprehensiveness.

wikiHow Staff Editor

Staff Answer

The scale tool allows you lot to modify the size of an chemical element while still keeping the aforementioned proportions. For case, you can make a rectangle twice as large as information technology was, while still keeping the sides the same lengths relative to each other.
Question

How practice I ready the scale in an AutoCAD layout?

This answer was written by ane of our trained team of researchers who validated it for accuracy and comprehensiveness.

wikiHow Staff Editor

Staff Answer

Select the layout viewport yous want to change, so click the triangular scale grip at the middle of the viewport. Select the scale yous want from the list to apply information technology to the viewport.
Question

How exercise I bank check the calibration in AutoCAD?

This reply was written by one of our trained squad of researchers who validated it for accuracy and comprehensiveness.

wikiHow Staff Editor

Staff Answer

To check the scale of a scale area or viewport, click the "View" tab, then select "Viewports Console," and then "Scale Monitor." Motion your cursor over the calibration area or viewport and look at the Calibration Monitor dialog box to check the scale.

Ask a Question

200 characters left

Include your email accost to become a message when this question is answered.

Submit

Advertizing

Thanks for submitting a tip for review!

Near This Commodity

Cheers to all authors for creating a page that has been read 84,952 times.

Is this article up to date?